Advertisement
N900
series install
3. Assemble the
weighing platform
Place the cover on the weighing
platform. Press down on each corner
to be sure it is completely seated.
5. Install the Rate PROM
Slide the Rate PROM into the slot with
the unlabelled side facing you. Press
it firmly until it snaps into place. Refit
cover.
Page 12
4. Remove the control
module cover
Remove the cover from the top rear
of the control module and set aside.
6. Connect weighing
platform to control
module
Turn the control module over and plug
the small end of the weighing platform
cable into the back of the module.
Installation Instructions
Underside of
Control Module
Advertisement
