Advertisement
N900
series install
10.Connect the meter cable to the postage meter
If using a postage meter, connect the
large end of the meter cable to the the
meter as shown. Tighten the
thumbscrews securely.
B900
B900
B700
11.Plug power supply unit into outlet
Plug the power supply unit into the wall outlet and turn power on.
After a short power-up sequence, the display appears as shown.
Note: If the scale does not power-up, check that the power cable is firmly attached to
the control module. Also check that the wall outlet you are using has power by plugging
in another device.
Page 14
DM series
Installation Instructions
If your postage meter is fitted with an
optional Datalink unit, connect the
large end of the meter cable to the
lower connector on the Datalink unit.
Tighten the thumbscrews securely.
Datalink
Advertisement
