Advertisement
N421
install
Use these instructions if
you have a N421, 2kg scale
The scale looks like this:
1. Make sure you have:
Scale
Power Supply Unit (in its own box)
User Guide
Rates PROM (You may or may not be supplied with a Rates PROM. If one
is supplied, fit it at step 4 or your scale may display incorrect rates. If one is
not supplied, your scale has been pre-programmed with the current rates
and will function without one until the next postage rate change).
Meter Cable (only supplied if you ordered a Pitney Bowes Postage Meter
at the same time as your scale)
Power Supply
Unit
2. Place your scale on a
level surface
Place the scale near a wall outlet and
within cable reach of your postage
meter (if you have one). Ensure the
scale location is a flat, stable surface
free of draughts and the scale is not
touching objects that may affect the
weight reading.
Page 2
Rate PROM
(if supplied)
3. Remove packing
Lift the platform and remove the
packing material.
Installation Instructions
Meter Cable
Advertisement
