Setting The Image Quality; Brightness; E.b.l; Setting The Audio - Toshiba D-VR4SU Owner's Manual

÷
4,, _,,,,_ °
ttmng the image quatity / Setting the audio
This section describes image quamity settings.
Preparation:
, Turn ON the TV and set it to the video input mode.
, Seiect "AV SETUP 2" in "AV SETUP'L For the proce-
dure, see steps 1 to 3 in "Using the SETUP MENU"
on page 23.
SY_M _ETUP BR_GHTN£SS
............ _v SETUP _ E.8.L.
BRIGHTNESS
You can control the brightness level of the image.
Select "BRIGHTNESS" and select the level from the
below.
MAX: The image becomes brighter.
STD: The image is of standard brightness.
MJN: The image becomes darker.
To select the black level of piayback pictures, set your
preference and monitor's ability.
ON: Enhanced grey scale (0 IRE cut off)
OFF: Standard grey scale (7.5 IRE cut off)
3O
Note:
The E.B.L. function only works when playing back DVD-
Video, DVD-RAM/RW/R or Video-CDs.
This section describes audio settings.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "AUDIO" from "AV SETUP". For the procedure,
see steps I to 3 in "Using the SETUP MENU" on page
23.
DRC
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound
for your equipment.
Select "DRC" and select the level from the below.
t_AX: FuII dynamic range is maintained.
ST[}: Full dynamic range is reduced.
TV: Dynamic range is reduced.
NOTES:
• This function works only during playback of Dolby
DigitaI recorded discs.
• When you Iisten to the sound from TV's speaker, we
recommend that you select "TV".
• The level of Dynamic Range Reduction may differ
depending on the DVD.
WRTUAL SURROUND (SpatiaHzer N-
2-2 TM)
Sound that is not recorded in the surround mode will
be changed to artificial surround sound and output.
Select "VIRTUAL SURROUND" and select "ON" to ac-
tivate the virtual surround function. To not use the vir-
tual surround, select "OFF".
NOTE:
This function does not work with a video tape.
EXTERNAL AUDIO INPUT
The audio mode for the audio input iack can be se-
lected, choosing either stereo or monaural.
Select "EXTERNALAUDIO iNPUT" and select from the
below.
STEREO: The sound is treated as stereo sound.
L ON: The sound is treated as the monaural
sound of the Ieft channel
R ON: The sound is treated as the monaural
sound of the right channel.
÷
2G10101A P22-P32 30 _ 2/25/05, 1:30 AM