Selecting The Audio Languages; Selecting The Digital Output; Using The Stablesound ® Feature - Toshiba FSTPure ColorStream 27DF46 Owner's Manual

Selecting the audio languages
When two or more audio languages are included in a digital signal, you
can select one of the audio language.
To select the audio language:
1. Press MENU, then press 4 or _ to display AUDIO menu.
2. Press A or V to highlight AUDIO LANGUAGE, then press _'.
A_Z[ZL_
MTS ST2EREO
BASS 2_
TREBLE
DIGITAL OUTPUT pCM
v
i_l :SELECT t_l :ADJ UST
3. Press A or V to select your desired language, then press ENTER.
4. Press EXIT to return to normal viewing.
Selecting the digital output
You can choose the format of the digital audio output signal.
To select the digital output:
1. Press MENU, then press _ or _- to display AUDIO menu.
2. Press A or V to highlight DIGITAL OUTPUT.
N JNNN
Auolo
MTS S_BO
BASS
TREBLE 2_
BALANCE
AUOIO LANGUAGE /[_
_HHHHHHHHHHHHHHHHHHHHHHHHHHHHHH_ _
_,:SBLBCT _:ABJ UST
3. Press _1or _ to highlight PCM or DOLBY DIGITAL.
4. Press EXIT to return to normal viewing.
Using the StableSound ® feature
The StableSound feature limits the highest volume level to prevent
extreme changes in volume when the signal source is changed.
To turn on the StableSound _> feature:
1. Press MENU, then press 41or _ to display the AUDIO menu.
2. Press A or _ to highlight STABLE SOUND.
3. Press _ or I_ to highlight ON.
_uDio
-- Exit
,,Z,:S_LECT '9 :ADJUST
4. Press EXIT to return to normal viewing.
To turn off the _
StableSound feature:
Highlight OFF in step 3 above.
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
33
J3W20221A(E) P31-Back 33 20/12/2005, 11:42AM