Selecting
the Audio
OUT sound
This
feature
allows
you
to select
the sound
source
(1X4A][N or
POP)
that
is output
from
the
AUD][O OUT
teH_linals.
This i.';usehll when amplifying or recording the POP sound with
external equipment while hearing the sound of"the main picture
through the built&l speakers. See ' Comlecdng
an audio system" on
page 17.
To select the Audio OUT sound:
1. Press MENU, and then press @ or _ until the AUDIO mem_
appears.
2. Press A or V to highlight AUDIO OUT.
3. Press @ or _ to select MAiN or POP.
@@@@@@
_BS
O N
SBS
LEVEL
100
SPEAKEBS
ON/
_
DI_
_ B_:?__i_ ¸ _! _@!_tii ¸ N¸
STAgEE
SOUND
©FF
* )!LA][N: Outputs the sound of the main program through the
AUDIO OUT terminals.
* POP:
Outputs the sound of the POP program through the
AUDIO OUT terminals.
Note:
Make sure the volume control of your audio
ampl/7/er is set to a moderale I/sler?/bq level
MENU
a,T4 },,
Using
the StableSound
_ feature
The StableSound _> feature limits he highest volume level to prevent
extreme changes in volume when the signal source is changed (f'or
example, to prevent the sudden increase in voktme that of'ten lmppens
when a TV program switches to a commercial).
To turn on the StableSound _ feature:
1. Press MENU, and then press @ or _ until the AUDIO I_leIlu
appears.
2. Press A or Y to highlight STABLE SOUND.
3. Press _ or _ to select ON.
@@®@@@
_
AUDIO
_BS
0 N
SBS
LEVEL
8O
SPEAKERS
ON
Note:
When the POP is not on ff_e screen, ff_e
soured of ff_e main program is ou@ut, even if
ff_e POP sound is se/eclec_
To turn off the StableSound _ f'eature:
Highlight OFF in step 3 above.
58