Tv Operation - Toshiba MW27H63 Owner's Manual

Combination flat color television and video cassette recorder/dvd video player
Hide thumbs Also See for MW27H63:
Table of Contents

Advertisement

ek setting
The auto clock function will automatically set the built-in clock (Month, Day,
Year and Time) when the unit is connected to an antenna or cable system
and it is turned off. As the unit searches for a receivable station in your area
and it receives a broadcast signal (analog) for auto clock, the auto clock
needs several minutes to set itself.
®
Preparation:
* Connect
the antenna
or cable system.
* If you use a cable box, turn it on.
Plug the AC power cord to the AC outlet.
Make sure the unit is turned
off.
• If you press POWER, the Auto Clock
set is not effective.
Wait at least three
minutes
and press POWER.
• Depending on the reception
Pow_,
condition, it may take approx. 30
O
minutes.
• The POWER indicator will light.
P,o?sR
-O-
Press TV/VCR
to select TV/VCR
mode. Then
press
DISPLAY
to check
the clock
on the
screen,
TWVCB
O
DISPLAY
(Eb
if the clock
is not set, check
the antenna
condition.
The Auto
clock
may not function
properly
if the reception
condition
is not good.
The Auto
clock
adjustment
will be performed
at
12:00 PM everyday
if you turn off the unit.
If you use a cable box and you want Auto Clock
adjustment
to be performed,
the cable box must be
left on.
The Auto Clock adjustment
is not effective when there
is a difference
of more than 5 minutes
exists between
the built-in clock time and the actual time.
When shipped
from factory, the AUTO CLOCK is set to
"ON". But if you do not want auto clock set (adjustment):
1
Press MENU, then
press
option.
ME_tl
S_TUp
O
,,I or _ to select
!
i iii,
El
!
!!iiiiili
!
Press A or T to select "AUTO CLOCK".
Press -q or _ to select "OFF".
$TANDAND
Press MENU
repeatedly
until the menu
screen
is cleared.
M_,_
• When the AUTO CLOCK is set to
_('_
"OFF", the Auto Clock adjustment
does not function.
Set the clock manually @.
Notes:
• if the unit does not operate
properly,
or No key
operation
(by the unit and/or the remote control):
Static
electricity, etc., may affect the player's operation. Disconnect
the AC power cord once, then connect it again.
• The TV section has its own menu and also DVD section has
its own menu _.
• If no buttons are pressed for more than about 60 seconds,
the TVNCR
menu screen will return to normal TV operation
automatically.
w
o
C
®
I
5Y40101A
indb
19
÷
19
2'2 .006
: 8 I5AM
]

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mw20h63Mw24h63

Table of Contents