Toshiba MW27H63 Owner's Manual page 47

mer recording
Timer recording can be programmed on-screen with the remote control.
The built-in timer allows automatic unattended recording of up to 8
programs within 1 month.
ENTER
A/v/4/_-
MENU
TIMER REC
®
Preparation:
• Press TV/VCR to select the TV/VCR mode.
• Lead a cassette tape with the erase prevention tab intact.
• Check the time and date are correct _.
E×amp[e:
Program a timer recording for 23rd day, channel 25 - 001
(Digital Channel), 7:00 - 9:30 PM (Tape speed : SLP).
1
Press MENU, then press ,_ or v to select [ ,_!
option.
Press A or T to select "TIMER REC SET", then
press _,-.
Press A or T to select one of the program line, then press ENTER.
.... _ ::_
Press _ or _ to select the date, then press T.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs and other materials,
is prohibited under the Copyright Laws of the United States
and other countries, and may subject you to civil and/or
criminal liability.
I 5Y40101A indb 47
Set the start time, end time, channel (Digital or Analog) and tape speed as in step 4.
Then press ENTER.
Notes:
• Press A to move cursor
backward for correction.
° To record from external
source, set the channel to
'%1" or "L2".
To set the timer for another program, repeat
steps 3 to 5 to set another program.
Press TIMER REC.The TIMER REC indicator will light.The Timer is programed, when the
programed time is reached, the recording is
automatically started.
T_c TIMEE}RREC TO cancelagaintimer recording, press the
__ button and TIMER REC indicator
s I _ will go off.
Notes:
° The VCR section cannot be used while the TIMER REC
indicator is lit. If you want to use the VCR operation, press
TmMER REC to deactivate the timer.
° When the clock is not set, you cannot select"TIMER REC
SET". In this case, set the clock _@.
° After a power failure or disconnection of the power plug,all
programmed recording setting and time display will be lost
upon resumption of power. In this case, reset the clock _
and reprogram any timer recordings.
° If you want to correct the digits while setting, press A or
_' until the item you want to correct, then press _ or _ to
correct the desired setting.
° If programming is performed without a tape in the unit,
or with a tape without an erase prevention tab, the Timer
Recording is not possible. If a tape without an erase
prevention tab is in the unit, the tape will be ejected.
0
o
g
N
÷
47]
12'21_006 11:I8[!9AM I
®