Toshiba MW27H63 Owner's Manual page 54

omm ocating desired scene
®
This unit will allow you to zoom in on the frame image.You
can then make selections by switching the position of the
frame.
I t
Use the title, chapter and time recorded on the DVD disc
to locate the desired point to playback. In the case of
VCD/Audio CD disc, time and track are used to locate the
desired point to playback.
To check the title, chapter/track and time, press DISPLAY. Press ZOOM during playback.
The center part of the image will be
'z"gg_ zoomed in.
O Each press of ZOOM will change the
ZOOM O,1 (x 1.3), 0,2 (x 1.5) and
0,3 (x 2.0).
1
Press _,lv141_ to view a different part of the
frame.
You may move the frame from the
center position to UP, DOWN, LEFT or
RIGHT direction.
In the zoom mode, press ZOOM repeatedly to return to a 1:1 view (0, Off).
INPUT
ZOOM
0
Notes:
• You can select the Pause, Slow or Search playback in the
zoom mode.
• Some discs may not respond to zoom feature.
1
Press JUMP during playback or resume stop
mode.
F---, Titlo ---I
Chapter ---
Time --:--:--
Press Number buttons (0-9) to input the
number.
(329(i) (K) Tit_e ---
Chapter
12 ]
(_ (_) (_) Time --;--;--
rid
If you input a wrong number, press
CANCEL.
Refer to the package supplied with
the disc to check the numbers.
Press ENTER. Playback starts.
When you change the title, playback
starts from Chapter 1 of the selected
title.
Some discs may not work in the
above operation.
Notes:
• In case of the Audio CD and Video-CD, only Track and Time
can be selected.
• In case of the Video-CD playback with PBC, the JUMP does
not work. See "To turn off the PBC"_.
®
I
54
5h40 0 Aindb 54
÷
12'21 2006 11:i8:33 AM