Toshiba MW27H63 Owner's Manual page 41

®
@ssette tape playback
To play a pre-recorded tape.
CASSETTE
LOADING SLOT
Load a pre-recorded tape:
(When loading a cassette tape without the erase
prevention tab, playback will start automatically).
To start playback:
Press PLAY on the front panel or on
the remote control.
Playback will start." _ " will appear on
the screen for about 4 seconds.
PLAY
CE)
To stop playback:
Press STOP/EJECT once on the front
panel or press STOP on the remote
control.
The tape will stop but remain fully
loaded and ready to play.
"B" will appear on the screen for about
4 seconds.
STOP/EJECT
[_ STOP
CK)
Illustration of MW20H63
'LAY REV
STOP/EJECT
Stop the playback or recording with STOP.
To rewind the tape:
Press REW on the front panel or press
REV on the remote control.
REW
To forward the tape:
Press PP on the front panel or press
FF on the remote control.
PF
To stop the tape-winding, press STOP. To switch to playback
directly (without STOP), press PLAY.
[] Forward/Reverse picture search mode
When the tape is being winded, you can switch to
picture search mode _.To do this, press REV or FF
again and hold it down. The unit will resume the tape
winding as soon as the button is released.
"0
E
®
Notes:
If you play a pre-recorded tape after the DVD playback, you
must set the unit to TV/VCR mode using the TV/VCR button.
This unit selects the playback tape speed SP or SLP
automatically.
When you select the TV/VOR mode during DVD playback,
DVD playback will change to the still mode, and after 5
minutes it will change to the stop mode automatically.
5Y40101A indb 41
÷
4,[
12'212006 11:i8 5AM ]