Tv Operation Tv Operation - Toshiba 15LV505 Owner's Manual

operation
[ TV operation
1
2
3
4
To turn on the TV/DVD, press POWER.
(POWER indicator on the front of the unit changes
blue. It may take approx. 10 seconds for a picture
to appear on screen.)
(.!>POWER
Adjust the volume level by pressing VOL
+
or - .
The volume level will be indicated on the screen
by orange bars. As the
volume level
increases, so
do the number of bars. If the volume decreases,
the number of orange bars also decreases.
Set the Signal Type option to the appropriate
position (see "Air/Cable selection" ~).
flUHF'ct18nri.•
ts .
I;)le.J\!
cti~nn'$l$
.r
Press the Direct Channel Selection (0-9, -)
buttons or CH 1\ / V to select the channel.
(If you press only channel number, channel
selection will be delayed for a few seconds.)
mmm®
m®®
A
CH
CDCD<D
v
me
TO SELECT ANALOG CHANNELS
1-9: Press 1-9 as needed. Example, to
select channel 2, press 2.
10-99: Press the 2 digits in order. Example, to
select channel 12, press 1, 2.
100-125: Press the 3 digits in order. Example, to
select channel 120, press 1, 2, 0.
TO SELECT DIGITAL CHANNELS
Press the first 3 digits, then press the - button,
followed by the remaining number.
Example, to select channel 015-001, press 0, 1,
5,
-,0,0,1.
• If a channel is selected with only audio content,
"Audio only" will be displayed on the screen.
• If a channel is selected with a weak digital
signal, "Digital channel signal strength is low"
will be displayed on the screen.
The same program may be
available
on either
an analog channel or a digital channel. You may
choose to watch either format.
• If a channel is selected to which you have not
subscribed, "Digital channel is encrypted" will
be displayed on the screen.
VHF/UHF/CABLE CHANNELS
Air Cable
VHF
VHF
2-13 2-13
UHF
STD/HRC/IRC
14-69 14-36 (A)(W)
37-59
(AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100) (125)
01 (5A)
Note:
• If a channel with no broadcast is selected, the sound
will automatically be muted.
• It may take a few seconds for a digital channel picture
to appear on screen after being selected.
I