Auto Power Off; Understanding The Power Return Feature; Appendix; Troubleshooting - Toshiba 42HP66 Owner's Manual

÷
÷
Auto power off
The TV will automatically turn off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its
broadcast for the day and stops broadcasting on that channel. This feature does not work in video input mode.
Understanding the Power Return feature
If the power is cut off while you are viewing the TV and the power is resupplied, the Power Return feature will turn the TV
on automatically.
If the power is going to be off for a long time or you are going to be away from the TV for a long time, unplug the power
cord from the wall outlet to prevent the TV from turning on in your absence.
Appendix
Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the symptom and some solutions.
Symptom Solution
Black box on screen • Select OFF in the Closed Caption menu to turn off the Closed Caption
Text mode.
TV will not turn on • Make sure the power cord is plugged in, then press POWER.
• The remote control batteries may be dead. Replace the batteries.
No picture, no sound • Check the antenna/cable connections.
No sound, picture OK • The sound may be muted. Press VOLUME.
• The station may have broadcast difficulties. Try another channel.
• The MTS feature may be in SAP mode. Select STR or MONO in the
MTS menu.
Poor sound, picture OK • The station may have broadcast difficulties. Try another channel.
• The MTS feature may be in SAP mode. Select STR or MONO in the
MTS menu.
Poor picture, sound OK • Check the antenna connections.
• The station may have broadcast difficulties. Try another channel.
• Adjust the PICTURE menu.
Picture and sound are out of sync • As with all products that contain a digital display, in rare instances,
when viewing certain content (e.g..television broadcasts, video games,
DVD), you may notice that the sound and picture are slightly out of
sync. This phenomenon can be caused by various factors including,
without limitation, video processing within the TV, video processing in
an attached gaming system, and video processing/different
compression rates used by broadcasters in their programming. You
may want to try one or more of the following suggestions, which may
help to reduce the effect of this phenomenon:-If the TV is connected to
an A/V receiver that has a programmable audio delay feature, use this
feature to help synchronize the sound to the picture.-If you notice this
phenomenon only on certain TV channels, please contact your local
broadcast, cable, or satellite provider to inform them of this issue.
Poor reception of broadcast channels • The station may have broadcast difficulties. Try another channel.
• Check the antenna connections.
• If you are using a video input, make sure the INPUT button is set
correctly.
Cannot receive above channel 13 • Make sure the TV/CABLE feature in the SETUP menu is set to "CA-
BLE."
Unable to select a certain channel • The channel may be blocked by the V-Chip feature or CH LOCK
feature, or erased with the add/erase feature.
÷
46
3X70121A En p46-bc 46 _ 1/31/06,11:00 PM