Setting The On Timer; Setting The Sleep Timer - Toshiba 42HP66 Owner's Manual

÷
÷
Setting the ON timer
This feature allows you to program the TV to turn on automatically at a
set time. If you program the ON TIMER to "DAILY," the TV will turn on
every day at the same time to the same channel until you clear the ON
TIMER.
To set the ON timer: (Example: Turning on the TV to channel 2 at
6:30 AM, DAILY)
1. Press TV to select the TV mode.
2. Set the clock, if you have not already done so (see page 31 .)
3. Press MENU, then press 4 or i_ to display the OPTION menu.
4. Press • or • to highlight ON TIMER.
5. Press 41 or I_ to highlight SET, then press ENTER. The ON TIMER
menu appears. Press _ to set the time.
6. Press • or • to set the desired hour, then press I1_.
oN I_MER
ON TIMER
CLEAR
RETURN
_,SELECl ,_,ADJU_T
7. Set the desired minutes and channel, as in step 6.
8. Press _ or _- to select ONCE or DAILY, then press ENTER.
oN T_MER
RETURN
,_,=SELECl ENTER:SET
9. Press EXIT to return to normal viewing.
To cancel the on timer:
Select CLEAR in step 8, above.
Note:
After a power failure or disconnection of the
power, the timer settings will be lost.
TV
Menu/
Enter
,AV4_
Exit
÷
Setting the sleep timer
You can use the sleep timer to automatically turn off the TV at a set
time.
To set the sleep timer:
Repeatedly press SLEEP on the remote control to set the length of
time until the TV turns off. The clock will increase 10 minutes for each
press of the SLEEP button (0h00m, 0hl0m, ...1 h50m, 2h00m.) After
the sleep timer is programmed, the display will appear briefly every
ten minutes to remind you that the sleep timer is operating.
To confirm the sleep timer setting:
Press SLEEP one time. The remaining time will be momentarily
displayed.
To cancel the sleep timer:
Repeatedly press SLEEP until the display turns to 0h00m.
TV
Sleep
32
Note:
If the remote control does net operate your TV,
press the "TV" button on the remote control
and try again.
3X70121A En p32-41 32 _ 1/31/06,10:59 PM