Selecting The Video Input Source; Labeling The Video Input Sources; Setting The Clock - Toshiba 42HP66 Owner's Manual

÷
÷
Selecting the video input source
Press INPUT to view a signal from
another device connected to your TV,
such as a VCR or DVD player. You can
select ANT, VIDEO1, VIDEO2, VIDEO3
ColorStream HD1, ColorStream HD2,
HDMI1, HDMI2 or PC depending on
which input jacks you used to connect
your devices (see "Connecting your
TV" on page 8.)
SOURCE SELECTIO_
_.VIOEOI
2.VIOEO2
3.VIDEO=
4.Co=o,St_m HO1
S.Colo,St_e_m HO2
6.HOMI1
7.HOMI2
S.PC
[O-a}:SELECT
Pressing INPUT on the remote
control displays the current
signal source (press INPUT
again or 0-8 to change)
You also can use the Channel A/v buttons to select the video input
source. In addition to cycling through your programmed channels
(page 24), the Channel A/v buttons will also cycle through the video
input sources, in the order illustrated below.
ANT (programmed channel) _ VIDEO1 <--'-> VIDEO2 <-"-'-> VIDEO3
PC _ HDMI2 _ HDMI1 _ ColorStream HD2 _ ColorStream HD1
Labeling the video input sources
The video label feature allows you to label each input source for your
TV from the following preset list of labels:
m
VCR
DVD
DTV
SAT
CBL
HD
Uses the default label name
Video cassette recorder
DVD video
Digital TV set-top box
Satellite box
Cable bex
HDMI device
To label the video input sources:
1. Press TV to select the TV mode.
2. Press MENU, then press _ or I_ to
display the OPTION menu.
3. Press • or • to highlight VIDEO
LABEL.
4. Press _, to display the VIDEO
LABEL menu.
5. Press • or • to highlight the video
source you want to label.
6. Press 4 or _ to select the desired
label for that input source.
7. Press EXIT to return to normal
viewing.
OPTION
oN T=MER OFF
FAVOmTE CH
OH LABEL
_.SELECT d_,:ADJUST
WDEO LABEL
VIDEO_
6 HDM_I
• HDM_2
RETURN
d_.SELECT d_,:ADJUST
Setting the clock
You must set the clock before you can program the ON timer.
To set the clock:
1. Press TV to select the TV mode.
2. Press MENU, then press _ or _ to
display the SETUP menu.
3. Press • or • to highlight CLOCK
SET, then press _,.
4. Press _1or _ to set the MONTH, then
press •.
5. Set the DAY,YEAR and TIME as in
step 4.
After setting the clock, the date and
time function starts automatically.
6. Press EXIT to return to the normal
screen.
SETUP
LANGUAGE EN_LI_H
TWCABLE TV
CHP_O_RAM
ADD_ERA_E
q_:_ELECT q_,:ADJUST
CLOCK _ET
YEAR 2006
T_E 12:OOA_
__.SELECT L_._JUS_
E_TEn:SELECT EXiT:END
31
Please note the following regarding
the HDMI source selection:
The HDMI IN jack is not intended for
connection to and should not be used
with a PC (personal computer.) See
"Connecting an HDMI or a DVl device to
the HDMI input" on page 14 and "Con-
necting a PC" on page 17 for details,
Input
TV
Channel
_/v
Menu/Enter
Exit
Note:
After a power failure or disconnection of the
power, the clock settings will be lost.
Note:
If the remote control does not operate your TV,
press the "TV" button on the remote control
and try again.
g N
' ii#_
÷
3X70121A En p26-31 31 _ 1/31/06,10:59 PM