Download Print this page

Thermador T18ID80NLP/21 Use & Care Manual page 24

For buit-in freezers

Advertisement

Available languages

Available languages

Fault
Possible cause
Remedial action
Be is forming in the suppUyhose to
the ice maker.
Water is flowing out of the
appliance.
Closeshut-off valve immediately.
The water pressure is too low.
The freezer compartment temperature
is too low.
The water pipe in tile appliance is
defective.
The water pressure is too low.
A wrong water valve has been
installed.
Check water pressure.The water pressure must be
between 25 and 120 p.s.i. (! .72-8.25 bar).
Check temperature of the freezer compartment.
If required increase tile temperature.
Call customer service immediately.
The valve may leak if the water pressure is too low.
The water pressure must be between 25 and 120 p.s.i.
(! .72-8.25 bar).
Self-tapping valvesand 3/! 6 inch (4.76 ram) saddle
valves reduce the water pressure and may eventually
block the pipe.
The manufacturer is not liable for damage to
property due to an incorrect installation or water
connection.
Changin
ulb
e
To avoid electrical shock which
can cause severe personal
injury
or death, disconnect
power to
appliance
before making repairs.
After making repairs, reconnect
power.
Switch
off the appliance
with
the POWER button!
Habgen
buMbs above
Halogen
bulb type:
20 W/12 V/bulb
holder
G4
C]
Release and removethe
cover.
C]
Pull out the defective
halogen
bulb.
I
Attach the cover to the clip and
lock into position.
Never touch a halogen bulb with
bare fingers. When inserting
a glass halogen bulb, always hold
with a soft c!oth.
We recommend
that a service
technician
changes the bulb.
E3
Insert a new halogen bulb,
Touch the halogen bulb with
a soft cloth only.
25

Hide quick links:

Advertisement

loading