Thermador T18ID80NLP/21 Use & Care Manual page 15

Dispensing water
Q Place a suitable jar on the drip
plate
Press the button to request
water. The water stops running
when you release the button.
Tip:
The water from the water dispenser
is cooled to a palatable temperature.
If you would like the water colder,
place ice cubes in the glass before
dispensing the water.
Dispensing ice
Risk of damage!
Do not use the dispensing
function longer than 3 minutes
within a period of 15 minutes.
Wait few minutes before
requesting ice again.
Place a suitable jar on the drip
plate.
Qr
Press the button to request
crushed ice. The spending
stops when you release the
button.
E_ Release the button when the jar
is almost full. Ice in the
discharge may cause the
receptacle to overflow or block
the discharge.
Pull-down pitcher
holder
Removing and cleaning
the pitcher holder
Spilled water collects in the water
collecting tray of the pitcher holder.
The water collecting tray can be
emptied and cleaned by pulling out
the pitcher holder.
Removing and cleaning
the ice cube container
If ice cubes have not been
dispensed for a prolonged period,
they will shrink, have a stale taste
and stick together.
16
Press the button to request ice
cubes. The spending stops
when you release the button.
To request a larger quantity of water
or ice fold out the pitcher holder.
Now it is possible to place a bigger
jar.
Pul! out the ice cube container.
A filled container is heavy!