Sony Handycam DCR-PC109 Operation Manual page 103

Touch the desired item.
When you are recording on a tape in
the VCR
Touch [OTHER DEVICE[.
QTouch [=MARK OUT].
The ending point of the first program is set,
and the !ower part of the program mark
changes to light blue.
When you are recording on a
"Memory Stick Duo"
1 Touch [MEMORY STICK].
_ Repeat steps 7 to 10 and create
programs.
2
Touch [IMAGE SIZE] repeatedly to
select the desired image size.
'7
Search for the beginning of the first
scene that you want to dub on your
camcorder, then pause playback.
You can adjust the position with
(frame).
The starting point of the first program is set,
and the upper part of the program mark
changes to light blue.
[IMAGE SIZE] appears when recording
on a "Memory Stick Duo."
Search for the end of the first scene
that you want to record on your
camcorder, then pause playback.
You can adjust the position with
(frame).
Skip this step if your camcorder is
connected via an iiINK cable or recording
on a "Memol T Stick Duo."
3Touch [START].
4Touch [EXEC].
A search for the beginning of the first
program starts, then the recording st_ts.
[SEAR(H[ appears during the search and
[EDITING] appears dnring editing.
SEARCH x_ 000_
SCENE 1,3
When a program is recorded, the program
mark changes from orange to light blue.
When all programs have been recorded, the
program editing operation stops
automatically.
To cancel recording, touch [CANCEL].
,-bcondnued
Dubbing/Editing 103
/
m