Step 5: Setting The Date And Time - Sony Handycam DCR-PC109 Operation Manual

Digital video camera recorder
Hide thumbs Also See for Handycam DCR-PC109:
Table of Contents

Advertisement

To use the viewfinderduring operation
When you are recording
on a tape or a "Memory
Stick Duo," you can ac_inst the exposure
(p. 38)
and fader (p. 43) while checking
the image on
the viewfinder.
Have the L(D panel rotated 180
degrees and closed with the screen facing out.
1
Set the power
mode to CAMERA-TAPE
or CAMERA-MEM
(p. 20).
2
Extend
the viewfinder,
and close the
LCD panel with the screen
facing out.
appears on the screen.
3
Touch
_.
[Set LCD off?] appears on the screen.
4
Touch
[YES].
The L(D screen is turned oft'.
5
Touch tile LCD screen while checking
the display
in the viewfinder.
[EXPOSURE],
etc. are displayed.
6
Touch tile button
you want to set.
• [EXPOSURE]:
Acliust with [ZZli[Z_I
and touch [_.
• [FADER]:
Touch it repeatedly
to select a
desired effect (only in the CAMERA-
TAPE mode).
• _
: The LCD screen lights up.
To hide the buttons
on the LCD screen,
touch [_1.
"_° Tip
• To adjust the brightness of the viewfinder backlight,
select
(STANDARD SET) menu, [LCDiVF
SET], then [VF B.LIGHT] (when you are using the
batte_T pack, p. 85)
Step 5: Setting the
date and time
Set the date and time when using this
camcorder
for the first time. If you do not set
the date and time, the [CLOCK
SET] screen
appears
every
time you turn on your
camcorder.
O
Note
• If you do not use your camcozde!
tbr about 3
months,
the built-in
rechargeable
button-type
batte W gets discharged
and the date and time
settings
may be cleared fioln the memo W In that
case, charge the rechargeable
button-type
batte W
(p 136) and then set the date and time again.
POWER switch
Open
the LCD panel.
Proceed to step 7 when you set the clock for
the first time.
Touch _.
Page 22

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Handycam dcr-pc108

Table of Contents