To Activate Group Mode (Group Mode Recording); Recording A Track Into A New Group - Sony MZ-S1 Operating Instructions Manual

How is group information
recorded?
When recording in group mode, lhe group
intbrmation is written lo the disc name
recording area.
This inlbmaation consists of text strings
lhat are written as shown in lhe lbllowing
example.
Disc name recording area
Example
O;Favorites//1-_,RocW/6-g;Pops//
O ® ®
(_) Disc name: "Favorites"
@ Group name for tracks 1 to 5: "Rock"
_) Group name for tracks6 to 9: "Pops"
Therefore, the above characler string is
displayed in its entirely as the disc name
if you load an MD recorded in group
mode into a syslem that does not support
group mode, or if you try lo edit 1he
contents of a disc on this recorder with
group mode lurned off.
It is possible to change the
character string by doing
"Relabeling recordings" procedure
in the "Labeling/relabeling
recordings" (page 37). Note that if
you rewrite this character string by
mistake, you may be unable to use
the group function of that MD.
Notes
• The group function setting is stored even if
you eject the MD or turn off _he recorder.
• In group mode, the recorder treats all tracks
without group settings as belonging to the last
group on the disc. The last group is indicated
in the display window on the recorder as
"GP --". Within a group, the tracks appear in
their order on the disc, not their order within
the group.
GROUP _o,o,__
To activate group mode
(Group Mode Recording)
'lb record tracks in group mode, you must
first turn group mode on belbre lhe start
of recording.
1
Press GROUP for 2 seconds or more.
"[_1 "and "GP ON" light up and
group mode lurns on.
To cancel group mode, press GROUP
for 2 seconds or more again.
Recording a track into a new
group
• Turn group mode on.
1 Press END SEARCH while lhe
recorder is stopped.
2 Press I_ while pressing REC.
Play the source sound.
To stop recording
Press •. The material that was recorded
up until • was pressed is entered as a new
group.
28