Sony MZ-S1 Operating Instructions Manual page 56

Symptom Cause/Solution
An MD is not played • Disc playing stopped before it came 1o the last crack.
fi'om |he first track. _ Press _ for 2 seconds or more to start pl3ying.
• Group mode is turned on.
Turn group mode off and pl3y from the first track (press I1_
for 2 seconds or more to starl pl3ying).
Playback sound • The recorder is placed where it receives continuous vibration.
skips. _ Put _he recorder on a stable place.
• A very short track may cause sound m skip.
Try not to creale a track under one second long.
Sound has a lot of • Strong mognetism from a lelevision or such device is interfering
tatic, wi|h operofion.
Move the recorder away fi'om the source of strong
magnetism.
Cannot find the track • You pressed I I al_er pressing _ or I_H.
marks. _ Press II before pressing _ or IHIH.
The disc cannot edit • The component does not support LP2 slereo or LP4 storeo.
on olher component. _ Edit on other component that support LP2 slereo or LP4
slereo.
Momentary noise is • Due to the special digital audio compression lechnology used in
heard. LP4 slereo mode, momentary noise may occur on very rare
occasions wilh certain sound sources.
Record in normal stereo or LP2 stereo mode.
The display window • The recorder was disconnec|ed from the power source.
is not normal. _ Let the recorder sit for a while, or disconnecl _he power
source, reconnect it, and then press any of_he operation
buttons.
56