Advanced Picture Adjustments; Color Temperature; Black; I/P Setting - Sharp Aquos LC-32M43U Operation Manual

Basic adjustment settings

Advanced picture adjustments

This TV provides various advanced functions for
optimizing the picture quality.
Press MENU to display the MENU screen, and
1
then press c/d to select "Picture".
Press a/b to select "Advanced", and then
2
press ENTER.
Press a/b to select a specifi c adjustment
3
item, and then press ENTER.
• You can select "Color Temp.", "Black", "I/P
Setting", "Film Mode", "3D-Y/C", "Monochrome",
or "Range of OPC".
Press a/b (or c/d) to select the desired
4
parameter.
• See the table for the selectable parameters.
Press MENU to exit.
5

Color Temperature

For a better white balance, use color temperature
correction.
Selected item
High White with Bluish tone
Mid-High
Middle
Mid-Low
Low White with Reddish tone

Black

Changes the viewing depth by automatically adjusting
the dark portion of an image for easier viewing.
Selected item
On For high detail in black portions
Off No adjustment

I/P Setting

Converts input signals depending on the type of
images.
Selected item
Fast Suitable for fast-moving images
Slow Suitable for smooth images with low
amounts of fl ickers
NOTE
• "I/P Setting" is not selectable when channel display shows
an input resolution of 480P, 720P, or 1080I.
26
Description
Description
Description

Film Mode (3:2 pull-down)

Automatically detects a fi lm-based source (originally
encoded at 24 frames/second), analyzes it then recreates
each still fi lm frame for high-defi nition picture quality.
Selected item
On Detects, analyzes, converts fi lm source
Off Normal viewing mode
NOTE
• "Film Mode" does not function when you set:
— the "AV Mode" to "Game" or
— the "I/P Setting" to "Fast".
3D-Y/C
Provides high quality images with minimal dot crawl
and cross color noise.
Selected item
Slow For still images
Standard Normal adjustment
Fast For moving images
Off (2D) For Game Mode
NOTE
• 3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).

Monochrome

For viewing a video in monochrome.
Selected item
On For viewing in monochrome
Off Normal color

Range of OPC

The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of e16 and a minimum of f16.
Selected item
f15 through e16
Max.
f16 through e15
Min.
NOTE
• The range of OPC settings are active only when the OPC is
set to On.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
Description
Description
Description
Description