Decorative Fronts - Heat & Glo SLR-C (COSMO) Owner's Manual

D. Decorative Fronts
WARNING! Risk of Fire! A decorative front is required
for this model. DO NOT operate this appliance without a
decorative front in place.
Only doors certifi ed for use with this appliance model may
be used. Contact your dealer for a list of doors that may
be used.
TONIC DECORATIVE FRONT
(TN-SLR-**)
Figure 13.12 Tonic Decorative Front
MARTINI DECORATIVE FRONT
(MT-SLR-**)
Figure 13.13 Martini Decorative Front
The tinted glass on the Martini Decorative Front meets the
tempered glass specifi cations in Section 1.B of this installa-
tion manual.
56
Inside and Overlap Fit
See Section 13.C.
Overlap Fit Only
See Section 13.C.
Heat & Glo • SLR-C • 2292-900 Rev. H • 2/13
TONIC FRONT
A
B
Figure 13.14 Dimensions of Tonic Decorative Front.
Table 1. Dimensions of Tonic Decorative Front.
Top of decorative front to bottom of
A
appliance.
Bottom of decorative front to bottom of
B
appliance.
Inside dimension of decorative front
C
(width).
Outside dimension of decorative front
D
(width).
Inside dimension decorative front
E
(height).
Outside dimension of decorative front
F
(height).
A
B
Figure 13.15. Dimensions of Martini Decorative Front
Table 2. Dimensions of Martini Decorative Front.
Top of decorative front to
A
bottom of appliance.
Bottom of decorative front to
B
bottom of appliance.
Outside dimension of
C
decorative front (width).
Outside dimension of
D
decorative front (height).
E F
C
D
26-3/8 in. 670 mm
6-7/8 in. 175 mm
39 in. 991 mm
44-1/2 in. 1130 mm
12-7/8 in. 327 mm
19-1/2 in. 495 mm
D
C
26-3/16 IN. 665 mm
7-5/16 IN. 185 mm
46-3/16 IN. 1172 mm
18-7/8 IN. 479 mm