Table of Contents
Advertisement
7
Heater Setup
A. Remove Shipping Materials
Cut and discard ties securing the logs to the grate and bun-
dling the fi rescreen. Remove screws holding ember bed
shipping tabs in place (located in front of ember bed), re-
move tabs and discard. Replace screws.
B. Clean Heater
The heater was cleaned at the factory but dust may have
accumulated during shipping.
•
Vacuum fi rebox area and wipe acrylic panel (in back of
fi rebox) with a dry, lint-free cloth or paper towel. DO NOT
USE GLASS CLEANER! It will ruin the acrylic panel.
•
Remove all fi ngerprints and smudges from the front trim
and glass doors to avoid permanently burning them into
the fi nish.
C. Accessories
Refer to the instructions included with the accessory.
14
Heat & Glo • CRESTFIRE Series Electric Fireplace • 4030-239 Rev J • 04/05
Hide quick links:
Advertisement
Table of Contents
