Soleus Air KY-32H Owner's Manual page 15

If you want to take out the internal tank before it is full of water, please stop the unit first.
Wait for 3 minutes before taking out the water tank to prevent the condensate water from
discharging into the unit.
NOTE: Do not take out the water tank when the unit is running on either cooling, heating or
dehumidifying mode or the alarm will sound and the compressor stops. The mode will
automatically change to FAN mode and the compressor will require approximately 3 minutes to
restart to the cooling, heating or dehumidifying cycle.
2) Continuous Drainage
The unit can operate on continuous drainage mode. When the unit is operating on
continuous drainage mode, condensate water does not go to the internal water tank.
Condensate is discharged by gravity through the drainage tubing to either an external tank
(not provided) or to a condensate water pump device
(Optional Item). When the unit is operating on continuous
drainage mode, it can operate continuously without
periodic stops to empty the water tank. Continuos
a) Pull out the plug of the drainage spout.
Plug
b)
Push/Click down the drainage spout and make it
direct downward.
c)
Hold down the drainage spout, and then connect the
drainage tubing into drainage spout.
d)
Place the other end of the drainage tubing into either an external water tank or the
receptor of a condensate water pump.
D_ainage
Spo_t
_lug
Normal Operation
Mode
-15-