Soleus Air KY-32H Owner's Manual page 10

optimal comfort.
NOTE: During hot days, the unit will cool off the room most efficiently by setting the
temperature at the lowest and the fan speed at the highest. Reducing the length of the exhaust
duct and insulating the exhaust duct and keeping direct sunlight to a minimum will also improve
the cooling efficiency.
2) Dehumidifying Operation
a) Be sure that the drain tank is properly placed in the unit.
b) Plug the Power Cord to the power outlet.
c) Turn on the unit by pressing the On/Off Button on the control panel.
d) Press the Mode Button until the bucket and dropping water and "DRY" appears
on the LCD display.
NOTE: Do not use the exhaust duct when the unit is running at dehumidifying model. You must
remove the exhaust duct from the unit. When the unit is running at dehumidifying mode, the Pan
speed cannot be adjusted.
Keep the windows and the doors closed to aid the effectiveness of the unit in removing the
moisture from the room.
3) Fan Operation
a)
b)
c)
d)
Plug the Power Cord to the power outlet.
Turn on the unit by pressing the On/Off Button on the control panel.
Press the Mode Button until "FAN" appears on the LCD display.
Select the fan speed by pressing the Fan Speed Button.
NOTE: When the unit is running on fan mode, the exhaust duct is inoperative and is not required.
4) Heating Operation
a)
b)
c)
Plug the Power Cord to the power outlet.
Turn on the unit by pressing the On/Off Button on the control panel.
Press the Mode Button until "Heating Symbol" appears on the LCD display.
-10-