Table of Contents
Advertisement
ASSEMBLY
TO ASSEMBLE
GRASS CATCHER
(See Figs.
3 and 4)
1.
Slide grass catcher bag over the frame. Make sure
the rear handle is on top (the same side as the front
handle) and the strap is on the bottom.
2.
Slip vinyl bindings over frame.
NOTE: If vinyl bindings are too stiff, hold them in warm water
for a few minutes. If bag gets wet, let it dry before using.
3.
Close grass catcher door.
NOTE: When fully closed, door will "snap" shut over frame
and vinyl bindings.
\
STRAP
REAR
HANDLE
FRONT
DOOR_
GRASS
CATCHER
FRAME_
VINYL
FIG. 4
TO INSTALL ATTACHMENTS
Your lawn mower was shipped ready to be used as a
mulcher.
To convert mower to bagging or discharging,
see "TO CONVERT MOWER" in the Operation section of
this manual.
FIG. 3
5
Advertisement
Table of Contents
