Wash Cycle Options - Fisher & Paykel AquaSmart WL26C Installation Instructions And User Manual

Wash cycle options

To alter any of the Wash Options explained below, please refer to page 22 for instructions on
changing the Wash Cycle Options.
Temperature
AquaSmart™ offers six wash temperatures (first phase of two-part wash system).
Cold
Incoming water
from faucet
Cold+ (Controlled Cold)
The Cold+ option helps to keep your cold water at the optimum temperature of 68°F
(20°C) for the most effective wash possible in cold water.
Bleach
If you wish to use liquid bleach, please select the BLEACH option to automatically
dispense bleach into the wash.
Spin Speed
Your AquaSmart™ washer offers three spin speeds: Fast (1000 rpm), Medium (700 rpm)
and Slow (300 rpm), plus an additional No Spin option.
Delay Start
This option delays the start of the wash from 15 minutes to 18 hours. We suggest that
you avoid using Delay Start for damp, non-colorfast items.
Drip Dry
Drip Dry alerts you when it is time to remove drip-dry garments before the final spin.
Press START to continue the cycle.
Soak
The Soak option provides a 2 hour soak during the middle of the wash phase. To exit
Soak at any time simply press the BACK button.
Changing the wash cycle options
Cold+ Warm/Cold
68°F 91°F
(20°C) (33°C)
Warm Warm/Hot
102°F 115°F
(39°C) (46°C)
23
EN
Hot
140°F
(60°C)