NordicTrack INCLINE TRAINER X5 NTK1494.1 User Manual page 7

insert a Handrail (67) into the Upper Handrail (68) as
shown, The Mowerend of the Handrail should sit on the
Base Hood (105) as shown, (Note: it may be necessary to
twist the Handrail as you insert it, it may aiso be neces-
sary to ioosen the two 1/2" Screws [63] severai turns,)
Next, tighten two 3/4" Screws (66) into the Handrail, if
you toosened the 1/2" Screws, retighten them.
Attach the other Handrail (not shown) to the Heftside of
the incline Trainer in the same way,
interiock the tabs on the Right Outer Cover (88) with the
tabs on the Right inner Cover (65), Attach the Right Outer
Cover with two 3/4" Boits (60) as shown
88
60
4, Remove the knob from the pin, Make sure that the collar
and the spring are on the pin. insert the threaded end of
the pin through the hob in the Left Outer Cover (61),
Tighten the knob back onto the pin,
insert the pin into the hob in the Left inner Cover (106),
Interlock the tabs on the Left Outer Cover (61) with the
tabs on the Left inner Cover, Attach the Left Outer Cover
with two 3/4" Bolts (60),
4
6O
61
Spring
106