Magnavox FP5230W Owner's Manual page 56

m.
<j
iP hookup with Cable
Converter Box and VCR.
First use an optional signal
splitter and connect the original
cable TV signal to both the
CABLE IN on the Cable Converter
and the ANTENNA plug on the
rear of the TV.
_2_ Connect the CABLE OUT
on
the Converter to the ANT. IN on
the VCR.
<_'_ Connect the VIDEO OUT
jack on the VCR to the VIDEO
IN jack on the TV.
Also connect the AUDIO OUT (R
and L) jacks from the VCR to the
AUDIO IN jacks on the TV.
A_ Remember to use the
Cable TV Converter Box to
select channels for PIP, the VCR
must be set to the same channel as
the channel selection switch on the
rear of the Cable Converter (either
channel 3 or 4).
®@
Contacl the Parts
Information Center
1 800 292-6066
to order any optional
REAR OF TV
AUDIO VIDEO
CABLES SUPPLIED
VCR
CABLE TV CONVERTER
I- I
56