Control - Magnavox FP5230W Owner's Manual

ensor Viewing allows parents to
block out, or "censor", any
channels they think children should
,not watch. A channel placed under
Censor Viewing cannot be viewed
until a correct access code is used to
unlock the channel for viewing.
• First let's set your Censor Code:
( BEGIN
J
_> Select the CHANGE CENSOR
CODE control.
With the ADVANCED CONTROLS
on screen, press the MENU A_'
buttons to move the red arrow. Then
press MENU button.
"ENTER CURRENT CODE" shows
on the screen.
_>
O, 7, l, on
Press 1 the remote.
"XXX.X"
shows on the screen as
you press the: number buttons.
'qNCORRECT ACCESS CODE"
will also show on the screen.
_> Press 7. 1 the remote
0, 1,
on
again.
"ENTER NEW CODE" shows on
the screen.
> Enter a new four digit number
code using the remote.
"ACCESS CODE REPROGRAMMED"
shows on the screen to let you know
the new code has been set.
_> Press the STATUS button
to
clear the screen.
A['[_'_ Remember. After you set the
_"_ new Censor Code go on to the
next page to see how to place
channels under Censor Viewing
control.
:IllH¿g,l,t H ,]d:11 ; | :1;] ; lllrl;E!L'r h'd:1
Parents - it isn't possible to unlock or
defeat your Censor Code without
changing to a new code number. So
if your Code number changes, and
you didn't change it yourself, then
you will know that someone has
altered the code and the blanked out
channel has been viewed.
ADVANCEDCONTROLS
AUTO-PROGRAMMING
AD_DELETE CHANNELS
REDCONVERGENCE
BLUE CONVERGENCE
TVSPEAKERS O N/OFF
CENSOR VIEWING
.18_ CHANGE C ENSOR CODE
USE _ THEN_ TOSELECT.
32