Magnavox FP5230W Owner's Manual page 34

P_"_e TV's Audio/Video Input
.[ jacks are Jbr ch'rect picture and
sound connections between the TV
and a VCR (or Video Disc Player,
etc.) that has Audio/Video Output
jacks.
7"0view the playback of a VCR
tape by using the Audio/Video
Input jacks on the TV:
_)
Connect the VIDEO OUT jack
from the VCR to the VCR/AUXI
VIDEO IN jack on the TV.
_> Connect the AUDIO OUT
jacks R(ight) and L(efl) from the
VCR to the VCR/AUXl AUDIO
IN jacks on the TV.
_) Select the VCR/AUX1
PICTURE SOURCE control, on
the TV. Try any of the three
following ways:
An easy way to select VCR/AUXI
is to press the VCR button on the
front of the TV.
If you have addeVd VCR/AUXI to
the TV's channel memory (see
page 29), press the CHANNEL
,1_' buttons to select it.
With the PI_SOUND
L'ONTROLS (see page 16), move
the red arrow with the MENU AY
imttons to PICWURE SOURCE.
Then select VCR/AUX 1.
_ Turn the VCR ON and press
PLAY to view the tape on the TV.
,__ Remember. Connections
_7 and use of the TV's AUX2
Audio/Video :Input jacks are the
same as for the AUX 1jacks
(',except "AUX2" is selected as the
Picture Source - step 3).
]Ifyou have a single (monaural)
Audio Output VCR, "y"
connectors are available to
complete your connection. Contact
your dealer, or our Parts
:Information Center, for details.
BACK OF TV
Contact y)ttr dealer or Parts
]nfommtion Center (I-800-292-6066)
to ord(_ _:ay optional accessories.
ANT OUT
VIDEO OUT
(YELLOW)
(RED/WH ITE)
AN'F lbl
OUTDOOR VHF1UHF
ANTENNA
VCR
CABLE "IV"SIGNAL
F ICTURE AND SOUND FROM
F LAYBACK OF VCR TAPE
34