Magnavox FP5230W Owner's Manual page 36

PT-_e Audio/Video Output jacks
.£ on the TV can be used to
record TV programs on VCRs
which have AudiolVideo Input
jacks.
To record TV programs by using
the Audio/Video jacks on the TV:
@, Connect the VIDEO OUT jack
ffom the TV to the VIDEO IN jack
on the VCR.
@_ Connect the FIXED MODE
AUDIO OUT jacks R(ight) and
L(eft) from the TV to the AUDIO
![Njacks on the VCR.
@_ Select the PICTURE
:SOURCE control, on the TV.
'With the PICFURFJSOUND
,CONTROLS on screen, move the
:red arrow with the MENU AY
buttons to PICTURE SOURCE.
Then select "ANT/CABLE".
Select the channel on the TV that
you want to record.
_ Turn the VCR ON. Put
a
cassette tape in the unit and place
the VCR in the RECORD mode.
Ai__--'l_'wr'_an Remember. If the VCR has
INPUT SELECTOR
switch, place it in the LINE or
CAMERA position.
Unattended Timer Recordings with
a VCR are possible, but not
recommended with this
connection, since the TV must be
left ON for the VCR to record.
VIDEO OUT
®
- '! i ....
: i1
AUDIO OUT
(RED/WHITE)
AUDIO/VIDEO INPUT
JACKSON VCR
::
... : _3:.::: .: : ....
VCR
<:.
PICTURE AND SOUND BEING
" RECORDED ON VCR.
36