Philips 46PP9302 Directions For Use Manual page 8

Connecting Accessory Devices to Your TV
Tjhe TV _ audio/video (A V) irlput jacks provide
r directpicture and sound connections
bem'een the TV and accesso_ T devices such as
VCRs, D VD players, and others that have A V out-
putjack_.
7his example, which uses the INPUT-AV l jacks,
shows you one wuy you can connect a VCR to
your TE
R_@r to the directionszfbr-use manual./br your
VCR jbr fi_rther iqfiJmlation on connections.
7b make the connections show,n it1tbis example,
you will need:
• one coaxial cubic (75f2)
• one cablejbr a vMeo connection (standard
RCA connector)
• two cablesjbr audio connections (standard
RCA connectors) (only one cubic is needed /br
a nonstereo VCR).
NOTE: Hw cables are not supplied with your TE
You should be able to buy them at most stores
that sell electronics. Or you cun call our
Customer Cure Center at 1-800-531-0039
Connect a cable TV or antenna signal to the ANT IN jack on the rear of the VCR.
Connect from the OUT jack on the rear
of the VCP, to the ANTENNA IN 75D--
jack on the rear of the TVI
3
4
Connect the VIDEO OUT jack on the
rear of the VCP, to the INPUT AV 1
VIDEO jack on the rear of the TVI
Connect the audio output R(ight) and
L(eft) jacks on the lear of the VCR to the
INPUT-AV 1AUDIO jacks on the real"of
the TV.
NOTE: if the VCP, is a mono (nonstereo)
unit, connect only the left audio cable,
which usually has a white connector.
Press the AV button on the remote con- trol as many times as necessary to select
the AV1 source.
'l_rn the VCR on and press PLAY to view a videotape on the TV.
Rear oIVCR
• (Example: Philips VCR
model VR674CAT)
[]
Coaxial Cable
Lead-in from
Cable TV Company
or VHF/UHF Antenna
N Pm,
To simplify making connections, audio and
video cables often have color-code connec-
tors. The jacks on your TV are likewise
color coded to match the connectors. The
coding is as follows:
• Yellow for video (composite)
• Red for the fight audio channel
• White for the left audio channel
NOTE: If your VCR is mono (non-
stereo), you will connect only one audio
cable. You must ensure that the TV is set
to MONO for the signal source to which
you've connected the VCR (INPUT-AV 1,
INPUT-AV2, or the side panel inputs
[AV3]). Otherwise, you will receive
sound from only one of the TV's speak-
ers. See page 36.
You can display the AV 1, AV2, or AV3 signal
sources in the PIP window. See pages 6 and 7
in the Quick Use and Setup Guide for infor-
mation on using/he Picture-in-Picture (PIP)
fealure. The VCR connection option shown in
/he Quick Use and Setup Guide will allow you
to use your VCR as a second, dedicated tuner
for viewing channels in the PIP window. Also
note that the PIP SWAP button allows you to
switch the main and PIP pictures.