Philips 46PP9302 Directions For Use Manual page 14

Connecting Accessory Devices to Your TV
D;gital equipment w,ith a 1080i or 480p out-
ut, is compatible w,ith the HD INPUT-AV 4
video jacks.
NOTE: This television is desigmed to be compati-
ble with high-de/inition sigmal standards 1080i
and 480p as spec!fied by the Electronic Industries
Association standard E[A 770.3. Because output
standards may vao_ by mam(/hcture_; you may
encounter some digital equipment that w,ill not
properly display pictures on the TJ_
7b make the connections show,n #1 this example,
you will need:
• one S-VIDEO cable
• three cablesjbr video connections (standard
RCA connectors)
• fimr cablesjbr audio connections (standard
RCA connectors)
• one coaxial cable (75_2).
NOTE: "lT_ecables are not supplied with your TJ_
You should be able to buy them at most stores
that sell electronics. Or you can call our
Customer Cure Center at 1-800-531-0039.
Connect S-VIDEO and audio cables. NOTE: This example uses
INPUT-AV I. You can use INPUT-AV 2 or
the side inputjacks if you want
• Connect an S-VIDEO cable fi'om the HI)
receiver's S-VIDEO jack to the TV's
INPUT-AV 1 S-VIDEO jack.
• Connect from the HD receiver's AUDIO
l/eft) and R(igbt)jacks to the TV's
INPUT-AV 1l/eft) andR(ight)AUDIO
jacks.
Connect component video and audio cables to the TV's HD inputs.
• Comaect fromthe YPRPB jacks on
the HD receiverto the TV's HI)
INPUT-AV4 G/Y, R/P_;B/Pb jacks.
• Comaect from the HD receiver's AUDIO
I/eft) and R(igbt) jacks to the TV's HI)
INPUT-AV4 l/eft) and R(ight)AUDIO
jacks.
Connect coaxial cables.
• Connect the coaxial cable lead-in from
your cable outlet, cable converter box, or
VHF/UHF anterma to the IN FROM
ANT jack on the HI) receivel:
• Cormect a coaxial cable fl'om the OUT
TO TV jack to the ANTENNA IN 75_Q
jack on the TV.
• Cormect the coaxial cable lead-in from a
satellite disb antenna to the SATELLITE
IN jack on the HD receiver.
Refer to the directions-for-use manual that came with the HD receiver for setup
instructions.
Coaxia[ Cable
Lead-in
(Example: Philips DSHDS00)
w
Making a standard connection along with the HD connection as shown
in the example (S-VIDEO) on this page will allow you to see the receiv-
er's onscrcen menu and a picture (valid signal) from the receiver should
it be switched to SD mode.
The HD INPUT-AV 4 jacks are for standard RCA connectors. Your HD
receiver may use RCA or BNC output jacks, if your HD receiver comes
with BNC jacks, you will need to purchase BNC-m-RCA adapters to
connect the receiver to the TV. You should be able to purchase these
adapters at most stores that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.
OR
BNC-to- BNC Adapter
RCA Connector Fitted to
Adapter Connection
RCA
Connector
The HD INPUT-AV 4 jaclcs arc compatible with some digital equipment
having RGB outputs with "sync on green" or RGB with "separate H and V
sync." Output standards for digital equipment, however, may vary by manu-
f:acturer. No industry standards have been established for HD television RGB
signal systems, timing, synchronization, and signal strengths. If the digital
equipment you want to connect to your TV offers both component video and
RGB outputs, component video is the suggested connection to use.
The default color-space setting for the HD INPUT-AV 4 jacks is YPbPr.
RGB is also an option. If the picture color looks grossly incorrect, try
changing either the receiver's or TV's color space. See the receiver's
directions-for-use manual for information on setting its color space. Or
see page 59 in this manual for setting the TV's AV4 color space.
AV4 and AV5 do not function with the PIP feature. They cannot be dis-
played in the PIP window, nor can the PIP window be displayed when
those signal sources are being viewed on the main screen.
14