Philips 46PP9302 Directions For Use Manual page 12

Connecting Accessory Devices toYour TV
T_le./bllowing instructions explain how to con-
ect a DVD player w,ithp_vgressive-scan
capability to the HD [NPUT-A V 4jacks on your
"lb make the connections, you w,ill need:
• three cables/br video connections (standurd
RCA connectors)
• two cablesjbr audio connections (standard
RCA connectors).
NOTE: Tbe cables are not supplied with your TI_
You should be able to buy them at most stores
that sell electronics. Or you con call our
Customer Cure Center at 1-800-531-0039.
Connect from the YPrPb jacks on the rear of the DVD piayer to the
HD INPUT-AV 4 G/Y, R/Pr, B/Pb jacks
on the rear of the TV.
Connect from the L(efi) and R(ight) AUDIO OUT jacks on the rear of the
DVD playep to the HD INPUT-AV 4
AUDIO L(efi) and R(ight)jacks on the reap
of the TV.
3
Make sure the DVD player is in pro-
gressive-scan mode. You will not get a
viewable picture through the HD
IN PUT-AV 4 jacks if the DVD player is
in interlaced mode.
For more information on placing your
DVD player in progressive-scan mode,
see the DVD player's directions-for-use
manual. Also, see the Helpful Hints to
the right. The way in which progres-
sive-scan mode is selected varies among
DVD players.
Press the AV button on your TV remote control as many times as necessary to
select the AV4 signal source.
Turn the DVD on, insert a disc, and
press play to view a DVD on the TV.
If you experience difficulties receiving
sound with a DVD disc, check the sound
settings through the DVD disc's menu.
]
Rear of DVD Prayer with Progressive scan Capability
ki_ , ',
®
®
12
If after connecting your DVD player your
display is filled with wavy lines, it may be
that your DVD player is not set to progres-
sive-scan mode. Some DVD players have an
I/P (interlaced/progressive scan) switch
located on the back or front of the playel\s for
changing fiz)minterlaced to progressive-scma
mode. Other DVD players may allow the
mode to be changed by pressing a button on
the DVD player's remote control or by using
the DVD player's onscreen menu. If the
interlaced/progressive-scan selection
option is provided only through the DVD
onscreen menu, you will need to connect
the DVD player to another AV input
source in addition to HD INPUT-AV 4 to
see the DVD menu. Select this additional
AV source on screen to see the DVD menu
and choose progressive-scan mode. You
will then be able to see the DVD picture
through the AV4 source.
Some DVD players have dedicated progres-
sive-scan output jacks that are labeled as
such and require no switching to provide a
picture through the HD INPUT-AV 4 jacks.
See your DVD player's directions-fol_use
manual for information.
The default colol_space setting for the
HD INPUT-AV 4 jacks is YPbPr. RGB is
also an option. If the picture's color looks
grossly incorrect, try changing either the
DVD player's or TV's color-space setting.
See the DVD player's directions-for-use
manual for information on setting its color
space. Or see page 59 in this manual to set
the TV's color space.
The Picture-in-Picture (PIP) feature does
not function with AV4 or AV5.