Philips 46PP9302 Directions For Use Manual page 15

Connecting Accessory Devices to Your TV
Digital equipment with a 1080i or 480p
output, is compatible with the HD INPUT-
AV 5 video input jack. ]71ispage presents one
possible connection scenario. See the HI) receiv-
er's directionszf!Jr-use manual /br more in/brma-
tion.
]b makz_the connections shown in this exat_q)le,
you will need:
• one DBI5 cable
• anS-VIDEO cable
• /bur cables./br audio connections (standard
RCA connectors)
• one coaxial cable 175£2).
NOTE: "171e c ables are not supplied with your TE
You shouM be able to buy them at most stores
that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.
Connect S-VIDEO and audio cables. NOTE Th's example uses
INPUT-AV 1.You can use INPUT-AV 2 or
the side inpta jacks if you would like.
• Connect an S-VIDEO cable from the HD
receiver's S-VIDEO jack to the TV's
INPUT-AV i S-VIDEO jack.
• Connect from the HI) receiver's AUDIO
L(efi) aud R(ight)jacks to the TV's
INPUT-AV l L(eft) and R(ight) AUDIO
jacks.
Connect the DBI5 video cable and audio cables to the TV's HD inputs.
• Connect from the DB 15jack on the
receiver to the TV's HD INPUT-AV 5
DB15 jack.
• Connect from the HI) receiver's AUDIO
L(efi) madR(ight)jacks to the YV's
HI) INPUT-AV5 L(efl) madR(ight)
AUDIO jacks.
Connect coaxial cables.
• Connect the coaxial cable lead-in from
your cable outlet, cable converter box, or
VHF/UHF matennato the receiver's
ANTENNA A IN jack. If desired, con-
nect the coaxial cable lead-in from maoth-
er RF signal ,sourceto the receiver's
ANTENNA B IN jack.
• Connect a coaxial cable from the OUT
TO TVjack to the ANTENNA IN 75£2
jack on the TV.
• Connect the coaxial cable lead-in from a
satellite dish antenna to the SATELLITE
IN jack on the receiver.
Refer to the directions-for-use manual that came with the HD receiver for setup
instructions.
or VHFIUHF Antenna
This television is designed to accept high-definition signal standards
1080i and 480p as specified by the Electronic Industries Association
standard EIA770,3, Because output standards may vary by manufiactuer,
you may encounter some digital equipment that will not properly dis-
play pictures on the TV.
Making a standard connection along with the HD connection as shown
in the example (S-VIDEO) on this page will allow you to see the receiv-
er's onscreen menu and a picture (valid signal) from the receiver should
it be switched to standard-definition mode.
You can also connect a 1080i or 480p video source that has component
video, RGB, or RGB+H/V output jacks rather than a DBI5 output jack
to the TV's HD INPUT-AV5. This type of hookup will require a special-
ty cable that has a DBI5 connector on one end and standard (phono-
type) RCA connectors on the other. See page 57 for more information
on HD INPUT-AV5 input compatibility. After making the connections,
also ensure that the TV's color-space setting matches the ouq_ut of your
video source, either RGB or YPbPr (see page 59).
The default color-space setting for the HD INPUT-AV 5 jack is RGB,
YPbPr is also an option, if the picture color looks grossly incorrect, try
changing either the receiver's or TV's color space, See the receiver's
directions-for-use manual for information on setting its color space. See
page 59 in this manual for information on selecting a color-space setting
for the AV5 input,
AV4 and AV5 do not function with the PIP feature, They cannot be
accessed in the PIP window, nor can the PIP window be accessed when
those signal sources are being viewed on the main screen.
15