Additional Features - Hotpoint 18 Owner's Manual And Installation Instructions

About crisper removal
Not all features are on all models.
Removing the glass cover
Crisper Removal
Unload the bottom shelf before attempting to
remove the storage drawers.
ToRemove:
Lift the (lrawe_ up slightly while pulling
them past the stop location.
If the door prevents you fl'om taking out
the drawers, first try to remove the door
bins. If this does not offer enough
clearance, the refligemtor will need to
be rolled fin'ward tmtil the door opens
enough to slide the (h'awet5 out. In some
cases, when you roll the refl_igerator out,
you will need to move the reti]geratof
to the left or right as you roll it out.
Toremove the glass cover:
Remove the glass, then the fl'ame. \_3]en
replacing the glass, push the fl'ont edge
fimflv into the fl'ame.
O Push up the glass cover at the reat:
Slide the glass cover backwards tmtil the
fl'ont edge coin es out of the fl'am e.
O Rotate the side ot the glass cover up.
Remove the glass cove_:
l; _, I, -,,,_,
Removing the frame
Toremove the frame:
I,ifl up the fl'ont oI the fl'ame using
both hands.
@ Slide the fl'ame fin'ward.
O Rotate the side ot the fl'ame up.
O Relnove the fl'alne.
About the additional features.
Not all features are on all models.
J
J i
ShelfSaver
TM
Rack
This slide-out rack hoMs twelve cans ot soda
or two wine/water bottles (lengthwise).
Can be removed fin" cleaning.
Toremove,slide the rack
out to the
stop
position, lift the rack up and past the stop,
and lift out.
/0