Hotpoint 18 Owner's Manual And Installation Instructions page 20

Installation Instructions
REVERSING THE DOOR SWING
(CONT.)
[] REMOVE THE FREEZER DOOR
%q_e the door shut with masking tape.
I(emove the hinge cover on top (ff the fl'eezer door
(on some models).
Remove the two Torx': screws, then lift the hinge
straight up to fi'ee the hinge pin fi'om the socket in
the top of the doo_:
TopHinge__ I
Remove the tape and tilt the door away fl'om the
cabinet. I,ifl it off the center hinge pin.
Set the door on a non-scratching sm'tace with
the inside up.
[] REMOVE THE REFRIGERATOR
DOOR
Tape the door shut with masking tape.
tr
Remoxe the center hinge pin with a ,/8 socket
and ratchet.
Plastic Washer
HingePin--
g
Center H inge _
Bracket
g
Fresh FoodDoor
Remove the tape and tilt the door away fl'om the
cabinet. Remove and save the washer on the hinge pin.
i,ifl the door straight up to fl'ee its bottom socket fl'om
the pin in the bottom hinge bracket.
Set the door on a non-scratching surfi_ce xdth the
inside up.
CAUTION: Do not let door drop to the floor.
To do so could damage the door stop.
[] TRANSFER TOP HINGE TO
THE LEFT
Interchange hinge and screws at top _ight with scre_:s
at the top left of cabinet.
Do not tighten screws on hinge side at this time.
20