Additional Features - Hotpoint HTS18BBPULWW Owner's Manual And Installation Instructions

About crisper removal w eetpoi, tcom
Not all features are on all models.
Removing the glass cover
Crisper Removal
Unload the bottom shelf before attempting to
remove the storage drawers.
ToRemove:
i,ifl the (h'awe_3 up slightly while pulling
theln past the stop location.
If the door prevents
you from taking out
the (h'awe_, fi_t try to remove the door
bins. If this does not offer enough
clearance, the refi-igerator will need to
be rolled fin'ward tmfil the door opens
enough to slide the (h'awe_ out. In some
cases, when you roll the refl_igerator out,
you will need m move the refl_igerator
to the lett or right as you roll it out.
Toremove the glass cover:
Remove the glass, then the fl'ame. _._]_en
replacing the glass, push the fl'ont edge
fimflv into the fl'ame.
0 Push up the glass cover at the rein:
Slide the glass cover backwards tmtil the
fl'ont edge conies otlt of the fl'anle.
Rotate the side ot the glass cover up.
Remove the glass cove_:
Removing the frame
Toremove the frame:
0 I,itt up the tixmt el the ti'ame using
both hands.
@ Slide the fl'ame fin'ward.
0 Rotate the side of the ti'ame up.
@ Reinove the fl'ame.
About the additional features.
Not all features are on all models.
ShelfSaver rMRack
This slide-out rack holds twelve cans ot soda
or two wine/water bottles (lengthwise).
Can be removed fin" cleaning.
To remove, slide the rack out to the stop
position, lilt the rack up and past the stop,
and lilt Otlt.