GE Profile 24 CustomStyle Owner's Manual page 17

Behind the Refrigerator
Be cmefifl when m{Mng tile refligerator
a_vayfiOli1 tile wall. All bTpes of floor
coverings can be dmnaged, particulmly
cushioned c{)verings and those xdth
embossed surlitces.
l'ull tile refligera/or suaight out and return
it/o position by pushing it suaight in.
M_)x-ingthe refiigerator in a side direction
m W resuh in &unage u) the floor covering
or refiigerator.
When pushing the refrigerator back,
make sure you don:t rofl over the power
cord or icemaker supply line.
Clean the condenser coils at least
once a J/eaF,
Under the Refrigerator
For most efli(ient operation, keep tile
area under tile refligemtor clean. Remove
tile base grille and sweep away or vacuum
up dust.
For best resuhs, use a brush spedally
designed tin this purpose. It is available at
most appliance paris stores.
Toremove the base grille, open both
doors, grasp the bottom of the grille and
pull it out.
Toreplacethe basegrille, line up tile clips
on tile back of the grille with the openings
in the baseplate and push the grille fb_wmd
until it snaps into place.
Preparing for Vacation
For long vaca/ions or absences, relil()ve
tood and unplug the retiigeramr. M_)ve tile
fieezer conuol to the OFForO posi/ion,
and clean the inmrior with a baking soda
solution of one tablespoon (15 ml) of
baking soda to one qumt (1 L) of water.
I,eave the doors open.
Move tile icemaker teeler arm to the STOP
(up) position and shut off tile water supply
to the refligemmr.
When _xJt] relurn from vacation,
select
WATER on the dispenser and press the
dispenser pad fi)r at least/wo minutes to
rem_)ve slale water fiom tile water system.
If the temperature can drop below freezing,
have a qualified servicer dr;fin the water
supply s)_stem/o prevent serious properly
damage (hm to flooding.
Preparing to Move
Secure all loose items smh asgrille, shelvesand drawers by taping them securely
in place to prevent damage.
Be surethe refrigeratorstays l)_an upnghtposition duringmowng.
17