GE Profile 24 CustomStyle Owner's Manual page 15

Ice Storage Bin
Toremove:
I,ifi the left corner to fiee the bin fiOln the
shelf and pull the bin suaight out while
suppor/ing it at flont and rear.
Toreplace:
Slide tile bin back umil the tab on the bin
locks into tile slot on the shelf. If the bin
does not go all tile way back, remove it and
rotate the drive mechanism 1/4 turn. Then
push the bin back again until the mb on the
bin locks into the slot on the shell
Important Facts About Your Dispenser
Add ke before filling tile glass x_4tlla
beverage.
Do not add ice fiom trays or bags to
tile storage bin. It may not _rush or
dispense well.
:, Avoid overfilling glass with ice and use of
nmrow or extra-tall glasses. Backed-up ice
can jmn the chute or cause the (loot in
the chute to fleeze shut. If ice is blocking
tile chum, poke it tim)ugh with a xw)oden
spoon.
:, Beverages and foods shouM not be
quick-chilled in the ice storage bin.
Cans, bottles or food packages in the
storage bin may cause the icemaker or
auger to jmn.
:, Some crushed ice may be dispensed even
though you selected CUBED ICEThis
happens occasionally when a taw cubes
acddentally get directed to the crasher.
After crushed ice is dispensed, some
water may
&ip fiotn
the dmte.
:, Sometimes a m()und of snow will turin on
the <loot in the ice chute. This condition
is nortnal and umally o((urs when you
have dispensed crashed ice repeatedly.
Tile snowxdll evenulally evaporate.
Dispensed water is not ice coM. For
colder water, add crushed ice or cubes
betore dispensing water.
15