Fisher & Paykel GB IE User Manual page 9

Installation instructions
7
Fitting the adjustable feet
Important!
Using the supplied adjustable feet is MANDATORY. For safety reasons and to ensure adequate
ventilation, the cooker chassis MUST NOT sit directly on the floor, a plinth, or other support surface.
The adjustable feet must be fitted to the base of the cooker before use.
Rest the rear of the cooker on a piece of the polystyrene packaging exposing the base for the
fitting of the feet.
Fit the four legs by screwing them tight into the support base as shown.
Figure 3 Location of feet Figure 4 Top of feet screwed in tightly
Levelling the cooker
Level the cooker by screwing the bottom of the feet in or out, as shown.
Figure 5 Levelling the cooker