GE GTR10HAX Owner's Manual And Installation Instructions page 7

ge.com
_'::_::! !!!! !! ::/Screw
"_; : _-_ _' Hoe
_ _ I 0 Removethe screw.
,_ I_ Gentlg remove the light shield bg
inserting a flat head screwdriver
_Bulb into the slot at the top of the shield
/) and pop it off.
/
Replacing the Light Bulb
Moving the control to COLD does not remove
power to the light circuit.
The bulb is located behind the shield
in the back wall.
_1 Unplug the refrigerator.
Removethe shelves (if necessarg).
Replace the bulb with an appliance
bulb of the same or lower wattage.
Insert the tab at the bottom of the light
shield into the light bulb housing and
snap into place.
01 Replace the screw.
Replace the shelves if removed.
Plug in the refrigerator.
10' RefrigeratorLight Location
', /
<._$j
Cover
12' RefrigeratorLightLocation
Preparing for Vacation
For long vacations or absences, remove food
and unplug the refrigerator. Clean the interior
with a baking soda solution of one
tablespoon (15 ml) of baking soda to one
quart (1 liter)of water. Leavethe doors open.
Preparing
to Move
Secure all loose items such as shelvesand
drawers bg taping them securelg in place
to prevent damage.
Be sure the refrigerator stags in an upright
position during moving.