Advanced Using Example - Sanyo PJ-Net Owner's Manual

Chapter 5 Network Viewer & Capture

Advanced using example

Displays the presentation data stored in the computer by using the wireless mouse
function from the projector.
1
Start capturing of the computer PC1 by using the projector.
Select "Network Capture" icon from the menu and select "PC1" and then select "Connect"
( p.63).
=> The Network Capture software installed in the selected computer will start capturing.
2
On the PC1 capture image projected on the screen, search a presentation file data
stored in the PC1 by using the wireless mouse function of the remote control sup-
plied with the projector.
3
Select a desired file and double click with the remote control .
=> The application by which the document was created starts and the projector projects the
presentation picture on the screen.
4
Start the presentation.
=> By using wireless mouse function, control the page browsing and some another opera-
tions for the PC1.
* For further instructions of the wireless mouse, please refer to the projector's owners manual.
* On the projected screen using with the network viewer, the shape of the mouse pointer dif-
fers from the one on the computer's screen.
PC1
* PC privided with the Network Capture.
PC3
Setting condition
Projector
Input mode: Network
Network Unit
Registering the connection: The IP address of the computer and proper parameter must
Mouse Display: "On" (
Computer PC1
Software: The Network Capture software is installed correctly and its icon appears on the
task bar.
64
PC2
Internet
PC4
Intranet
be set to the PC1 (
p.62)
Project a screen
image of PC1 with
PJ2.
Capture
PJ2
p.61, p.63).
* Controlling PC1 with the
wireless mouse.