Input - Sanyo PJ-Net Owner's Manual

Input

This function is to select the input mode and source mode of the projector.
Select the input mode with the radio button, and input source mode with
the pull-down menu button. Then set the selected input mode and source
mode by clicking Set button.
Select a input mode
with radio buttons.
Select a source
mode with pull-down
menu.
Item
Input1 ................Available RGB(Analog),
Input2 ................Available VIDEO,
Input3 ................Available VIDEO, S-VIDEO,
Network..............Using the Network Capture &
Control the projector
Description
RGB(Scart), RGB(PC Digital),
RGB(AV HDCP), Monitor out
source mode.
Y,Cb/Pb,Cr/Pr, RGB source
mode.
Y,Cb/Pb,Cr/Pr source mode.
Viewer function.
Network Unit
OWNER'S MANUAL
41