Sealed Burner Assemblies - GE C2S980 Owner's Manual And Installation Instructions

Care and cleaning of the range,
ge.com
Be sure electrical power is off and all surfaces are cool before cleaning any part of the range.
If gour range is removed for cleaning, servicing or ang reason, be sure the anti-tip
device is re-engaged properlg when the range is replaced. Failure to take this
precaution could result in tipping of the range and cause injurLt.
Front right burner
Burner (/ )
cap
Burner _
neaa
Electrode, _
Burner_ -_-_:
base
Make sure the hole in the burner
head is f_ositionea over the electrode
and that the burner head is futlg
iaser_eo inside the burner oose.
A small gap between the base and
head is normal
Front left burnen back rignt Durner
aria Dock left Durner
Bur_/
Stabil _ ;_U'_a
cnamDer sew_nc
,€,,_ _-_, neealeo,
(k,_ _ y/) twist-tieto
"_,_.w,_/ unclog the
small hole
Burner base Electroae inthe
burner
neaa.
Make sure the slot in the burner
head is oositioned over
the electrode.
Sealed Burner Assemblies
Turn all controls OFF before removing the
burner parts.
The round side burner caps and burner
heads can be lifted off, making them easy
to clean. The electrodes are not removable.
The oval center burner head and cap
assembly can be lifted off, making it easy
to clean. The burner electrode is not
removable.
Lb.__../_.) " " Electrode
CAUTION:oo
not operate
the
cooktop without al! burner parts and grates
in place.
Electrode
Front left, back
right and back left
burner
Burner head j_
Electrode
Burner
base "_L_'_
Front right burner
The electrode of the spark igniter is
exposed when the burner head is
removed. When one burner isturned
to LifE, all the burners spark. Do not
attempt to disassemble or clean around
ang burner while another burner is on.
An electric shock mag result, which
could cause Uou to knock over hot
cookware.
31