GE C2S985SET7SS Installation Instructions Manual

Hide thumbs Also See for C2S985SET7SS:
Table of Contents

Advertisement

Available languages

Available languages

Installation
Instructions
Range
Questions?
call
1.800.GE.CARES
(1.800.432.2737)
or visit www.GEAppliances.com
IN THE COMMONWEALTH
OF
MASSACHUSETTS
[] This product must be installed by a licensed
plumber or gas fitter.
[] When using ball type gas shut-off valves, they
shall be the T-handle type.
[] A flexible gas connector, when used, must not
exceed 3 feet.
[AWARNINGi
FIRE OR EXPLOSION
HAZARD
If the information
in this manual is not followed
exactly, a fire or explosion may result causing
property damage, personal injury or death.
Installation must be performed by a qualified
installer.
Read these instructions completely and carefully.
Installation of this range must conform with
local codes, or in the absence of local codes,
with the National Fuel Gas Code, ANSI Z223.1/
NFPA.S4, latest edition. In Canada, installation
must conform with the current Natural Gas
Installation Code, CAN/CGA-B149.1 or the current
Propane Installation Code, CAN/CGA-B149.2, and
with local codes where applicable. This range
has been design-certified
by CSAInternational
according to ANSI Z21.1, latest edition and
Canadian Gas Association according to CAN/
CGA-I.1 latest edition.
When installing a gas appliance the use of old
flexible connectors can cause gas leaks and
personal injury. Always use a NEW flexible
connector.
Leak testing of the appliance shall be conducted
according to the manufacturer
instructions.
The range must be electrically grounded in
accordance with local codes or, in the absence
of local codes, in accordance with the National
Electrical Code (ANSI/NFPA 70, latest edition).
In Canada, electrical grounding must be in
accordance with the current CSAC22.1 Canadian
Electrical Code Part Z and/or local codes. See
Electrical Connections in this section.
Do not install this product with an air curtain
hood or other range hood that operates by
blowing air down on the cooktop. This airflow
may interfere with operation of the gas burners
resulting in fire or explosion hazard.
FOR YOUR SAFETY:
Tip-Over
Hazard
A child
or adult
can
tip the
range
and
be killed.
Install
the
anti-tip
bracket
to the
wall
or floor.
Engage
the
range
to the
anti-tip
bracket
by sliding
the
range
back
such
that
the
foot
is engaged.
Re-engage
the
anti-tip
bracket
if the
range
is moved.
Failure
to do so can
result
in death
or serious
burns
to children
or adults.
If you did not receive an anti-tip bracket with your
purchase, call 1.800.626.8774 to receive one at no
cost. (In Canada, call 1.800.561.3344.) For installation
instructions of the bracket, visit: www.GEAppliances.com.
(In Canada, www.GEAppliances.ca.)
Anti-Tip Bracket
Kit Included
[IkWARNING]
Before beginning
theinstallation,
switchpower off at
service paneland lock theservice
disconnecting m eans to prevent power
from beingswitchedon occidentally.
When theservice disconnecting means
cannot be locked, s ecurely f asteno
prominent warningdevice, s uch as o
tog, totheservice panel.
range
can become
hot. Installation
of any other
ACAUTION
- Only
the GE Caf@ branded
over-the-range
oven above
a GE Caf@ range
series
of Advantium®
or microwave
over-
may
result
in surface
temperatures
that can
the-range
ovens
are designed
to be installed
cause
burns.
above
the
GE Caf@ range.
Surfaces
above
a gas

Advertisement

Table of Contents
loading

Table of Contents