GE Profile 42 Owner's Manual And Installation Instructions page 26

Installation Instructions
3/4" FULL-WIDTH OVERLAY CUSTOM PANELS
This panel design provides a nearly trimless appearance.
Assemble the spacer panel onto the backer panel. Allow 1/2" clearance on all four sides of the
grille spacer panel. Allow 1/2" clearance on the top and hinge side, 15/16" on the bottom and 3-5/8"
on the handle side of the upper freezer door panel. Allow 15/16" on the top, 1/2" clearance on the
bottom and hinge side and 3-5/8" on the handle side of the lower freezer door panel. Secure the
panels with glue. Be sure to observe clearances on all sides.
Secure the appearance panel to the assembled backer/spacer panel. Use glue
and screws. Countersink screws into the backer panel.
Grille Panel
F:I I:]
1/4" Backer Panel 39-15/16" 10-3/4"
0.10" Spacer Panel 38-15/16" 9-3/4"
3/4" Overlay Panel 40-3/16" 11"
F:I I:]
1/4" Backer Panel 45-15/16" 10-3/4"
0.10" Spacer Panel 44-15/16" 9-3/4" Requiredfor Optimal
Handle Clearance
3/4" Overlay Panel 46-3/16" 11"
Upper Freezer Panel
F:I I:]
1/4" Backer Panel 16-7/16" 17-13/16"
0.10" Spacer Panel 12-5/16" 16-3/8"
3/4" Overlay Panel 13-7/16" 17-5/8"
F:I I:]
1/4" Backer Panel 18-7/16" 17-13/16"
0.10" Spacer Panel 14-5/16" 16-3/8"
3/4" Overlay Panel 15-7/16" 16-5/8"
Lower Freezer Panel
5/16":
F:I I:]
1/4" Backer Panel 16-7/16" 35-1/8"
0.10" Spacer Panel 12-5/16" 33-11/16"
3/4" Overlay Panel 13-7/16" 34-15/16"
F:I I:]
1/4" Backer Panel 18-7/16" 35-1/8"
0.10" Spacer Panel 14-5/16" 33-11/16"
3/4" Overlay Panel 15-7/16" 34-15/16"
Upper Freezer Panel
Spacer Assembly
3-5/8"
1/2,, 1/2_
Spacer
Pane!
J
Finished
BackerPallel
Lower Freezer Panel
Spacer Assembly
3-5/8"
1/2" _
15/16'-_
Spacer
Panel
1/2"_
Finished
BackerPallel
26