GE Monogram ZGU36GG Owner's Manual page 17

" k
(,lass Coo top Surface (;leaning
Gas Cooklop
Normal daily
use cleaning
ONLY use CEI_dMA BI(YTF' Ceramic Cooktop
Cleaner on the glass cooktop. Other creams may
not be as effective.
To maintain and protect the surfi_ce of your glass
cooktop, follow these steps:
1. Befin'e using the cooktop fin" the fi_5t time,
remove the burner grates and clean the
cooktop with CEILBd_IABRYTE®Ceramic
Cooktop Cleaner. This helps protect the top
and makes cleanup easier:
2. Daily use of CER_BdMA BRYTE: Ceramic
Cooktop Cleaner will help kee I) the cooktop
looking ne_:
3. Shake the cleaning cream well. Apply a few
drops of CER?d_4ABRYTE®Ceramic Cooktop
Cleaner dire{'tlv to the {-ooktop.
4. Use a paper towel or (2EI{Bd_4A BRYTE"
Cleaning Pad fi)r Ceramic (_ooktops to clean
the entire cooktop smti_ce.
5. Use a dry cloth or paper towel to remove all
{leaning residue. No need to rinse.
NOTE: It i,sveryimportant that yoa DO NOT heat
the coo[¢to/) until it has been cleaned lhorou@ly.
Clean your cooktopafter each
spill. Use CERAIVlA BRYTP_
Ceramic Cooktop Cleaner.
Burned-on
residue
WARNING: DAMA (;E to your g la.s:ssu@,:e may
o( ( ar ![you u.se s_rab pads other than the pad
included with your (ooktop.
AVERTISSEMENT : Urns pouvez F£\7)OMMA GER
vol*_:su_?n e ea vitrocdramique si voa._ ittilis_z de._
@onge._ de r& umW atttre._ qua ( elle._( ompri.se._ avec
vol**: appareiL
1. Allow the cooktop to cool.
2. Remove the burner grates. Spread a few
drops of CEILBd_IA BRYTE®Ceramic Cooktop
Cleaner on the entire bm'ned residue area.
3. Using the included CEI_Bd_4A BRYTE:
Cleaning Pad fl)r Ceramic Cooktops, rub the
residue area, applying pressure as needed.
4. If any residue remains, repeat the steps listed
above as needed.
5. For additional protection, after all residue
has been removed, polish the entire surface
with CEI_dMA BRYTE: Ceramic Cooktop
Cleaner and a paper towel.
Use a CERAMA BRYTE ®Cleaning
Padfor Ceramic Cooktops or a
Scotch-Brite _ Multi-Purpose No
Scratch blue scrub pad.
tT[(?aT)y,
burned-on
residue
1. Allow the c{}{}ktoI) to cool.
2. Remove the burner grates. Use a single-edge
razor blade scraper at appr{}ximately a 45 °
angle against the glass sm'lhce and scrape
the soil. It will be necessary to apply pressure
to the razor scraper in order to remove the
residue.
3. After scraping with the razor scrape_; spread
a fi_w drops of CEI_Dd_:IA BRVFE ® Ceramic
Cooktop Cleaner on the entire burned residue
area. Use the (;EI_Bd_IA BRVFE: Cleaning Pad
to remove any remaining residue.
4. For additional protection, after all residue
has been removed, polish the entire surface
with CEI,Dd_IA BRYTE: Ceramic (;ooktop
Cleaner and a paper towel.
The CERAMA BRYTE ® Ceramic Cooktop
Scraper and all recommended supplies are
available through our Parts Center. See
instructions under "To Order Parts" section
on next page.
NOTE:Do not use a dull or nicked blade.
17