GE Monogram ZGU36GG Owner's Manual page 15

N07_: B_,]bre _wnoving" the burner caps and
head,s, remember their size and location. Replace
them in the same lo_ation <(tier ch+aning'. The
burner head,s and burner bas_ are labeled 13, C,
D and H to aid _,assemb(r.
Burner caps
I,ifl off when cool. Wash burner caps in hot,
soapy water and rinse with clean water. You may
scour with a plastic scouring pad to remove
bm'ned-on fl>od particles.
Burner heads
The slil,_ in the burner heads <_/your _oohlop must be
kept c&an <d all time,_ /br an even, unhampered
,f[tl llze,
You should clean the bm'ner caps, bm'ner
heads and bm'ner bases routinely, especially
atter bad spillovers, which couhl clog the
openings in the bm'ner heads, i,ifl off when
COO1,
m(> rem(>ve burned-(>n food, s(>ak the bm'ner
heads in a s(>lution ot mihl liquid detergent
and hot water f(>r 20-30 minutes. For more
stubborn stains, use a toothbrush.
After eleanin_"
geli>re putting the burner caps and heads
back, shake (>tit excess water and then dry
them thoroughly by setting in a warm (>ven ti>r
30 minutes.
Replacement
The burner heads and burner bases are labeled
B, C, D and H to aid reassemblv:
Medium Small Small
head head head
and cap and cap and cap
+
(_c Front of cooktop D(_
Large Extra
head large
and cap head
and cap
]leplace the bm'ner heads on the bases
matching the letters. Reph_ce the caps on the
heads. Make sure that the caps and heads are
replaced in the correct location. There are two
small (H), (>ne inediunl (B), one large (C) and
one extra large (D) head and cap.
pins
Pin slots
When replacing, make sure the locater pins in the burner head
are seated in the pin slots of the burner base, Rotate the burner
head around the burner base until it is level and securely seated.
15